[LargeFormat] glue for filmholder ID
Rei Shinozuka
largeformat@f32.net
Sat Dec 28 09:59:35 2002
i bought some used riteways and one or 2 had numbers which appeared to be
stuck with some kind of contact cemenet.
the grafmatics do have the 1-6 number wheel, but i have six and i'd like to
number them A-F as well.
-rei
> From: Les Newcomer <lnphoto@twmi.rr.com>
>
> I used crazy glue, but haven't checked to see if the acetone will affect
> the plastic should I remove mine. I actually made up a number list on the
> mac and shot it with lith film. this way the numbers are smaller. I also
> took a fiberglass scratch pen (for removing battery corrosion) and took
> the shine off the film before I attached it. I also did a postive in one
> corner and a negavtive in the other. that way the id will be somewhere
> readable.
>
> BTW unless somebody had done a number wheel ectomy on your Grafmatic, it
> has a number id system already.
>
>
> les
>
>
> On Friday, December 27, 2002, at 01:07 PM, Rei Shinozuka wrote:
>
> > i'd like to make some filmholder IDs for my riteways and grafmatics.
> > i figure a sharpie on chips made from cutting up fixed clear 4x5 film
> > would be about right, but what's the preferred way of gluing it into the
> > slot semi-permanently?
> >
> > thanks,
> >
> > -rei
> >
> > --
> > Rei Shinozuka shino@panix.com
> > Ridgewood, New Jersey
--
Rei Shinozuka shino@panix.com
Ridgewood, New Jersey