[LargeFormat] glue for filmholder ID
Les Newcomer
largeformat@f32.net
Fri Dec 27 22:17:29 2002
I used crazy glue, but haven't checked to see if the acetone will affect
the plastic should I remove mine. I actually made up a number list on the
mac and shot it with lith film. this way the numbers are smaller. I also
took a fiberglass scratch pen (for removing battery corrosion) and took
the shine off the film before I attached it. I also did a postive in one
corner and a negavtive in the other. that way the id will be somewhere
readable.
BTW unless somebody had done a number wheel ectomy on your Grafmatic, it
has a number id system already.
les
On Friday, December 27, 2002, at 01:07 PM, Rei Shinozuka wrote:
> i'd like to make some filmholder IDs for my riteways and grafmatics.
> i figure a sharpie on chips made from cutting up fixed clear 4x5 film
> would be about right, but what's the preferred way of gluing it into the
> slot semi-permanently?
>
> thanks,
>
> -rei
>
> --
> Rei Shinozuka shino@panix.com
> Ridgewood, New Jersey
>
>
> _______________________________________________
> LargeFormat mailing list
> LargeFormat@f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat
>