[LargeFormat] Bellows Repair
tripspud
largeformat@f32.net
Tue Jan 6 01:04:01 2004
Hi!
I've received today the 5x7 Press Graflex I won:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2969297697&indexURL=3#ebayphotohosting
The camera can still be focused without the rack and pinion, but I'll try
to get it fixed.
The seller mentioned Fred Lustig.
It's a little rough, but not too bad and it didn't cost a lot. There
was one film/plate?
holder with the camera as well as the groundglass back. The problem is with
the
film holder. The film holder is about a half inch larger than a standard 5x7
holder
and has large grooves along the sides. Plus, on the inside, there's this
metal strip
in the center. Could this be a plate holder? It's not for film, I think. My
standard
5x7 holders will not work without modification to the camera.
So the first big hurdle is to get the correct FILM holders for this
camera. I
need some help here. What to look for?
Thanks everyone!
Rich Lahrson
Berkeley, California
tripspud@transbay.net
Richard Knoppow wrote:
> ----- Original Message -----
> From: "tripspud" <tripspud@transbay.net>
> To: <largeformat@f32.net>
> Sent: Wednesday, June 11, 2003 10:01 AM
> Subject: Re: [LargeFormat] Bellows Repair
>
> > Hi Richard,
> >
> > I wish I knew who did the bellows replacement on
> my modified
> > Seneca 5x7. It's really nice work. FWIW, the mod was
> done in
> > Steve Grimes' shop, but I picked up the camera off the
> eBay.
> >
> > It might be worth checking Steve Grimes' shop.
> Though he
> > is sadly no longer with us, his shop is continuing to
> operate.
> >
> > Cheers,
> >
> > Rich Lahrson
> > Berkeley, California
> > tripspud@transbay.net
> >
> FWIW, here is a list of bellows makers I've collected.
> Camera Bellows
> Unit 3-5
> St. Pauls Road
> Balsall Heath
> Birmingham
> B12 8NG
> http://www.camerabellows.com/
> Tel: +44 (0) 121 440 1695
> Fax +44 (0) 121 440 0972
>
> Flexible Products Co.
> 14504 60th St. N.
> Clearwater, FL 33760
> (727) 536-3142
> (800) 551-3766
> Fax: (727) 535-1295
> http://www.flexproducts.com
> info@flexproducts.com
>
> Joe Merry
> Turner Bellows Inc.
> 526 Child Street
> Rochester NY, 14606
> (716) 235-4456 x202
> jmerry@turnerbellows.com
> http://www.turnerbellows.com
>
> Universal Bellows
> 25 Hanse Avenue
> Freeport, NY 11520
> tel. 516-378-1264
>
> Western Bellows Company
> 7454 Henbane Street
> Etiwanda, Ca. 91739
> email. westernbellows@aol.com
> phone. 909 980-0606
> Contact Jim Ormond.
>
> Some of these may no longer be current.
>
> In addition Fred Lustig, as mentioned, has some bellows
> for Graflex products.
> Calumet has bellows for some of the older Calumet view
> cameras.
>
> ---
> Richard Knoppow
> Los Angeles, CA, USA
> dickburk@ix.netcom.com
>
> _______________________________________________
> LargeFormat mailing list
> LargeFormat@f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat