[LargeFormat] 9 1/2" Dagor
Richard Knoppow
largeformat@f32.net
Thu Oct 16 22:36:03 2003
----- Original Message -----
From: "Larry J Schaaf" <ljs@verizon.net>
To: <largeformat@f32.net>
Sent: Thursday, October 16, 2003 4:56 PM
Subject: [LargeFormat] 9 1/2" Dagor
> Help! I have a 9 1/2" f6.8 Dagor in an Ilex No 3 Acme
> shutter. Unfortunately, the f/stop scale is missing - it
is the
> kind that is an arched flat plate that mounts on the face
of
> the shutter with two screws. Can anybody provide a scan
> of theirs so I can make up a replacement? A while back
> David Galway of Ontario posted a notice that he was
> replacing such a shutter with a Copal - by any chance
> does he still have his old scale? or any other
suggestions
> most appreciated (Grimes would cost too much)
>
> thanks
> Larry
>
>
If no luck elsewhere you may be able to get one from
S.K.Grimes shop. http://www.skgrimes.com
If you just want to make a scale you can cut one from shim
stock. Calibrating is easy.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@ix.netcom.com