[LargeFormat] Linhof Compur 0.0 Shutters
Clive Warren
largeformat@f32.net
Tue Jun 11 09:06:48 2002
At 21:37 10/06/02 -0700, Brock Nanson wrote:
>----- Original Message -----
>From: "Clive Warren"
>| This evening have been inside the Linhof Compur shutter on a 65mm SA
>| to do a CLA. Someone else had been there before me but I now have
>| most of it sorted out and back together. The one thing that is still
>| puzzling me is the cocking mechanism which is gear driven from a ring
>| attached to the cocking lever driving a small 3/4 crown wheel which
>| has an associated coil spring and lever on the same spindle. Anyone
>| been there or maybe a service manual?
snip
>So you're an expert now? When my 00 on the 90 SA fails, can I send it to
>you??
snip
>Mine can't be locked open without a cable release. Is yours the same? The
>threaded fitting for the release is slightly loose on mine, I suspect this
>will be the point of failure one day.
Brock,
Give me big and old shutters any day. Although an interesting and
challenging experience, stripping down a 0.0 it is not the sort of activity
that makes you glad to be alive - it is a similar feeling to that from
filling in tax returns. A necessary evil......
Yep, send me the 0.0 when it needs a CLA - I promise to return any of the
cogs and springs left over and will pop a country shutter in with it so it
can be used ;-)
Until I resolve the cocking spring issue mine is out of action. It is now
CLA'd and everything else works fine, ie the lens caps slide on and off
perfectly.......
Cheers,
Clive