[LargeFormat] Part 2 Hold ON!! Graflok ground glass
Les Newcomer
largeformat@f32.net
Sat Dec 15 11:20:09 2001
I picked up a box of ground etched glass while cleaning out an estate a
couple of the boxes say Trusite. Any idea what this is?
Les
Ken Hough wrote:
>
> Clive,
> I have made lots of ground glass. When I use grinding compound I place a
> 1/2 inch plate glass on the bench and a slurry of roughing powder and water.
> Then I put the piece to be ground on top and start a figure 8 motion.
> I'll work it till the appropriate grind is done. But the acid is available in
> different grades. Coarse to fine. So no more hand grinding!
> Ken
>
> To: largeformat@f32.net
> From: Clive Warren <cocam@cableinet.co.uk>
> Subject: Re: [LargeFormat] Part 2 Hold ON!! Graflok ground glass
> Send reply to: largeformat@f32.net
> <mailto:largeformat-request@f32.net?subject=subscribe>
> <mailto:largeformat-request@f32.net?subject=unsubscribe>
> Date sent: Sat, 15 Dec 2001 14:39:45 +0000
>
> [ Double-click this line for list subscription options ]
>
> At 2:31 pm -0600 14/12/01, Ken Hough wrote:
> >Has anyone besides me done this?
> >Ken
> >
> >>HOLD ON !! You need the following:
> >> .062 thick glass. Go to a glass shop and have them order a sheet for you.
> >>If they will not try another glass shop. Or a stained glass shop.
> >>Pittsburgh Plate glass makes it. A 2x3 foot section costs 22.00
> >>Second, while at the stain glass shop get some acid etch for your glass.
> >>3rd. Get the glass cut to size minus 25 thou on 2 sides. This insures
> >>it will float a bit in the frame. Now the fun part. Put heavy clear
> >>packing tape
> >>on one side of the glass. Cover the whole side. Cut the excess tape off.
> >>Now apply the Acid etch. DO NOT LET THIS STUFF CONTACT YOU
> >>OR ANYTHING METAL. Do it in a tupperware tray. Let it etch fo the
> >>proper time. READ THE INSTRUCTIONS!. Rinse and remove the tape.
> >>Guess what kiddies! You have ground glass. Remember do not be afraid.
> >>My Motto is JUST DO IT.
> >>Ken
>
> Looks like you're one of very few Ken!
>
> I have used fine grinding paste (aluminium oxide) and some sheet
> glass and produced reasonable results. It is easier to focus with a
> ground glass rather than etched glass in my experience. However the
> image quality on an etched glass is significantly higher and in most
> cases preferable if focusing is not a problem.
>
> Cheers,
> Clive
>
> _______________________________________________
> LargeFormat mailing list
> LargeFormat@f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat
>
> ******Ken Hough Photographic Repair******
> Specializing in Deardorff Refinishing
> Lens Recementing and Shutter repair
> Contribitor to McKeowns Price Guide
> Deardorff Section
> Custom machined Photographic items
> Text Contents Copyright 1999 KHPR
> http://deardorffcameras.0catch.com/
> Est. 1980
>
> _______________________________________________
> LargeFormat mailing list
> LargeFormat@f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat